CARLO GAVAZZI MDI 40 TF - CONFIGURATION SOFTWARE Manual do Utilizador descarregar pdf (Página 6)

ENGLISH

COMPENSATION (TC)

Cold junction, within a temperature range from 0 to 50°C of ambient

temperature.

ALARM SET-POINTS

2 independent standard set-points;

Alarm type: the alarm is active only for under/over-range, high alarm, low

alarm, low alarm with disabling at power-on, high alarm with latch, low

alarm with latch.

Interaction of the two set-points (on request).

Set-point adjustments: programming of minimum and maximum value;

Set-point and hysteresis level: programmable from 0 to 100% of the

displayed range;

Activation/deactivation time delay: programmable from 0 to 255 sec-

onds;

Relay status: selectable; normally energized/de-energized;

Output contacts: 2 x SPDT; rating: 5A, 250VAC/VDC, 40W/1200VA,

130.000 cycles;

Min. response time: 400 ms (filter excluded, set-point activation time

delay: “0”);

Insulation: 2000VRMS between output and measuring input; power-

supply for signal output

FILTER

Operating range: from 0 to 3999;

Filtering coefficient: from 1 to 255

DATA HOLD

automatic storage (RAM only) of the minimum and maximum value

measured from the previous storage reset onwards.

Gross Automation (877) 268-3700 · www.carlogavazzisales.com · [email protected]

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Sem comentários

CARLO GAVAZZI MDI 40 TF - CONFIGURATION SOFTWARE Manual do Utilizador Página 6